SLPM magnetic pulse solenoid valve

Body material	Wrought brass
Seal material	NBR
Connection type	Thread
Pressure range	0.5-10Bar
Structure type	Pilot type
Interface size	13-50mm
temperature range	0-60 degree centigrades
Optional voltage	AC220V, AC24V, AC380V,AC110V,DC24V,DC12V, 50/60HZ

Product parametersSize chartSolenoid valve selection

SLPM magnetic pulse solenoid valve

Introduction

This series valve is famous for sensitive reaction and high pressure,

Usually be used to circuit control board connection, it is good for energy saving,

Widely used to IC card gas combustion meter, water saving irrigation, water meter

and various automatic flushing of sanitary ware.

The core of the valve can be pulled and stretched to be the good shape, with

good strictness, credibility, sensitive reaction and long life.

Using Conduction

Fluid Medium: Water, Gas (but not corrosive)

Fluids Temperature: ≤60℃, please use at the area,

Which relative temperature can’t over than 85%

How to use

To exchange the poles of the battery for on-off

Standard technical parameters

Body

Interface size: 3/8-2’’

Flow diameter: 13-50mm

Body material: Wrought brass

Connection type: G thread

Pressure class: 0.5-10bar

Structure type: Pilot type

Control type: Normally closed

Components

Seal material: NBR

Medium temperature: 0℃-60℃

Ambient temperature: 0℃-70℃

Install way: According to the body tag to install, in order to enhance

the valve service life, better coil upward, horizontal installation;

Coil voltage: DC24V/12V, other voltage can be customized

SLPM magnetic pulse solenoid valve size and data

Thread connection size drawing

Pipe Size	Flow Diameter (mm)	Working Pressure Range (Kgf/cm2)	The Max. Temperature ℃	Outline dimension	Model
Pipe Size	Flow Diameter (mm)	Working Pressure Range (Kgf/cm2)	The Max. Temperature ℃	Length × Width × Height	Model
3/8”	10	0.5-10	60	66×48×83	SLPM-10
1/2”	15			66×48×83	SLPM-15
3/4”	20			75×58×88	SLPM-20
1”	25			96×70×101	SLPM-25
11/4”	35			131×96×116	SLPM-32
11/2”	40			131×96×116	SLPM-40
2”	50			165×120×142	SLPM-50

Related pictures

Solenoid valve application and selection

1.     Valve types:     2/2way     2/3way (3 way valve please note the pressure inlet port working type)

2.     Operation type:   Normally closed (Power off closed, power on open)   □

Normally open    (Power off open, power on close)   □

3.     Coil optional：   Normal temp. (F class) □        High temp.(H class) □       Explosion proof (X) □

The standard junction box configuration □       Lead type configuration □

4.     Voltage:     AC       V    50/60HZ                  DC        V

Voltage values (V) ______   Power requirement _______   without power requirement ________

5.     Medium: Air □   Water □ Hot water □   Steam □      coil gas □   Light oil □

6.     Medium temperature: _______℃

7.     Body material: Wrought brass □   Casting copper□   SS304 □ SS316□   Others □

8.     Pressure: The mini. Inlet pressure______ kfg/cm2       The max. inlet pressure _______ kfg/cm2

After the valve and before the valve pressure difference _______ kfg/cm2

Whether there is the differential pressure in the system

9.     Connection size: Inner thread G ______   ANSI thread NPT ______ Flanged ________

10.   Flow size _________ mm           Or needed to flow under the rated pressure differential

11.   Service environment:   Ambient temp.: _____ ℃   Indoor____ Outdoor_____ Underwater_____ Others _______

12.   Other optional:     Such as with manual, etc _______________________________________________________________

13.   Special requirements: ____________________________________________